Recommended Products
Ads

Choosing Suitable Foil Embossing Dies

The process of embossing involves application of special dies to erect letters on the surface of a material. The resultant three dimensional objects are very beautiful before the eyes. The final result is more appealing to look at when special foil embossing dies are used. The foils are more needed when there is need for underlining specific details. The details to be highlighted include logos, designs and names. Foil embossing is often combined with die embossing to achieve desired outcomes.

This process is normally used in designing business cards, brochures, invitations, presentation folders, certificates, greeting cards and rack cards. Almost every element and picture of a design can be taken through the embossing process. A detailed die and paper of heavier density are the most effective in bringing out the design.

The main dies used in the embossing process are copper, brass, magnesium and scratch. Though different, they are all involved in the real process as determined by a number of factors. They paragraphs that follow explain these dies and their functions.

Magnesium foils are normally applied in stamping flat surfaces, and is designed from magnesium. This is a silvery metallic element that expands on a slight exposure to small heat. The foil is acid etched, and is very affordable compared to other dies.

Copper foils are also applied in stamping flat foils. Due to the fact that copper is a stronger metal in relation to magnesium, it expands by a lesser margin upon exposure high temperatures as contrasted to magnesium. It is often recommended for more than hundred thousand impressions. They are acid etched, and have potential for handling many details as contrasted to magnesium. They are usually more expensive than those made from magnesium. It takes about 2 to 3 days come up with such foils.

The next type of foil is that applied on brass. They are normally used in the embossing of single level and multilevel flat foils, removing the stamps and all these activities combined. This foil is designed from the alloy of zinc and copper. Whenever it is exposed to rising temperatures, its enlargement degree is the least as contrasted to the other foils mentioned. This type is usually hand etched. Besides this, it is less affordable as compared to magnesium. Designing this foil takes a minimum of five days.

Scratch off die is also commonly used. The surfaces on which they are commonly used are plastic and coated stock. This type comes in varied designs. They are all used for the sole purpose of coming up with different designs. The only effect brought about by the different dies is production of differently colored designs.

Different types of dies are, therefore, used in bringing out designs. The factors considered in choosing a good die for embossing. The factors include their response to heat, the amount of time spent in their production and the types of materials to be used on. All of them are very vital in bringing out a three-dimensional design that appeals to the eyes of people looking at it. Choosing an appropriate printer is very important to prevent waste of resources on buying inappropriate dies.

You can visit www.dynamicengraving.com for more helpful information about Excellent Types Of Foil Embossing Dies.

Leave a Reply

Recommended Products
Doctor's 

Trust